TEST SART IN SCOPE
of IMO Radio Survey

9GHz SART Tester STU-1

Modern Technology to ensure safety at sea

Request for quote
 
 
Progressive technology to ensure maritime safety

9GHZ SART TESTER STU-1

The SART Tester STU-1 is designed to provide accurate, independent validation of the operation of any 9GHz Radar SART in accordance with the requirements of IMO Resolution A.802(19) and SOLAS - 74/88.

The STU-1 performs quick checking of the SART parameters and provides a conclusion whether it has passed the test and can be used as a reliable rescue instrument in an emergency situation.

The Tester is portable and easy in use. It is far more effective and reliable than the primitive self-test function offered by any SART.

01
ADVANCED DEVICE TO GET IMMEDIATE RESULTS

Product overview

The SART Tester STU-1 is designed for marine radio surveyors and classification societies. The device allows to ensure that a 9GHz SART meets all the appropriate performance requirements.

The SART Tester measures signal level and duration, calculates the distance in nautical miles from the SART across the radial line on the radar screen, verifies that the signal is in frequency range of 9140…9560 MHz and also counts the number of sweeps and shows them in the graph view. The testing is performed through the broadcast.

To begin measurement, one should connect the STU-1 to a laptop or PC and run the software. The test procedure is managed with help of the software and the measured results are immediately displayed on the screen.

After the measurement is done, all the results can be saved and automatically input to a test report. The test report is generated by the software application in correspondence with the IMO requirements.

Technical Specification

SART Tester carries out the tests in accordance with the requirement of IMO Resolution A.802(19) and SOLAS Convention 74/88.

The tester allows to perform:

  • automatic measurement of SART parameters
  • measurement of response signal duration within the range of 50…150 us
  • measurement of response signal power level within the range of Рr = 300…950mW
  • signal reception on frequency range of  9140…9560 MHz
  • counting the number of sweeps in response signal

Specifications:

1. The Tester creates request pulses with parameters:
 - Carrier frequency 9350 MHz
 - Repetition rate 4000Hz, with accuracy ±10%
 - Duration 1.4µs, with accuracy ±10%

2. The Tester allows to measure the parameters of the response signal with parameters:
 - Duration 50…150µs with accuracy ±5%
 - Power level indication 300...950 mW, with accuracy ±2.0dB

3. The current consumption of the device in measurement mode is < 350 mA.

4. Dimensions: 117 mm x 76 mm x 23 mm

5. Weight: 105g

6. Measurement of SART parameters is made through the broadcast by means of antenna.

7. According to service conditions the device is designed for operation in the internal shielded ship rooms at the temperature +5°С...+55°С, and relative air humidity of 95%.

 
SART Tester STU-1
02
SART Tester STU-1 Dimensions
 
SMALL TESTER FOR EFFECTIVE SURVEY

Dimensions

The STU-1 is designed to provide accurate, independent validation of the operation of any Radar SART in accordance with the IMO requirements and classification societies.

This test tool is portable and easy in use. It is far more effective and reliable than the primitive self-test made with help of the ship radar.

Dimensions of main unit: 117 x 79 x 25 mm

Weight of main unit: 105 g

Dimensions of carton box: 200 x 120 x 50 mm

Total weight in carton box: 250 g

03
ACCURATE MEASUREMENT OF SART PARAMETERS

Product Features

  • Fast check to make sure the 9GHz Radar SART will operate in an emergency;
  • Fast passed/not passed test;
  • Audio-control of the sweep signal presence;
  • Signal level measurement;
  • Checking the signal in the frequency range of 9140…9560 MHz;
 
  • Number of sweeps in the graph view;
  • Response signal duration;
  • Distance from SART across the radial line on the radar screen;
  • Automatic creation of a test report. Windows/Mac OS supported.
 

SART Tester carries out tests in accordance with the requirements of IMO Resolution A.802(19) and SOLAS Convention 74/88.


Complete set
 

In the box

USB-A - micro USB-B Cable
1
SART Tester STU-1 Complete Set
Main unit
(SART Tester STU-1)
2
  1. USB-A - micro USB-B Cable
  2. Main unit (SART Tester STU-1)

Complete set
 

Also you get

Beacon Tester software

Software for Windows and Mac OS

 
Beacon Tester User Manual

User Manual

 
GMDSS Tester CE && Calibration Certificates

CE & Calibration certificates

 


TO START USING EASY AND FAST

Video Manuals for SART Tester

Subscribe to our YouTube channel
to stay updated with new videos of this tester

SART Tester Videos
04
Connect the tester to your laptop to generate test reports

CONNECTION TO PC AND DOWNLOADS

SART Tester STU-1 provides testing when operated by means of our special software. It is necessary to connect the STU-1 to a laptop or PC by means of standard USB A - Micro-USB B cable and run the software.

The software is available for download. It is a unified program used with most of our Testers, so you don’t need to install different programs for each GMDSS Tester made by Aeromarine SRT. The software is compatible with Windows, MAC OS X and Linux. It provides the possibility to automatically generate the test reports in a format required by IMO and classification societies. Even more, the surveyor can now generate one summary report for all safety equipment tested on a vessel.

Linux, OS X and Windows 10 do not require any drivers installation. For Windows 7 and earlier versions, the STM driver should be installed for proper connection on the first run.

* FTDI driver should be installed for proper connection on first run.

 
Here you can download user manuals, test report examples and software for SART Tester. Some files require formal registraton. Please click .
SART Tester STU-1 Brochure (version: 2.0; 14.02.2020; 564 kb)
Main features and specification of SART Tester STU-1
Complete technical description and operation user manual for SART Tester STU-1
Note: Limited access. Login for downloading the item.
Test report example (version: 1.0; 10.10.2019; 0 kb)
Examples of certificate created by SART Tester STU-1 Software. The test report is important logical completion of test process.
The latest software for GMDSS Tester. Download and manage test results for Radios, AIS and EPIRB. Automatic generation of test reports. 32bit and 64bit Windows OS compatible.
Note: Limited access. Login for downloading the item.
Latest software for GMDSS Tester. Download and manage test results for Radios, AIS and EPIRB. Automatic generation of test reports. Mac OS X.
Note: Limited access. Login for downloading the item.
Full Catalogue GMDSS Testers (version: 1.2; 05.12.2019; 5.7 Mb)
Full catalogue of our equipment with detailed description and specifications
SIMPLY USE IT

We supply the testers with very friendly software. The procedure of test report generation is fast and simple.

GET IT DELIVERED

The test instruments are shipped for free of charge to any location globally. Receive your order within 5 working days!

BUY AT BEST PRICE

Here you purchase from manufacturer directly. Therefore we can offer you the best prices and risk reducers.

MINIMIZE YOUR RISKS

We provide global two years warranty against manufacture and firmware faults. We assure continuous customer support, tech team is always READY to help and can be easily contacted.

Get one
To Become a Recognized Inspector

Send a request and our managers will contact you as soon as possible

By sending us your request, you agree to our privacy policy.

over 20 years
of expirience
3500 testers sold
to 72 countries
worldwide
We are on the web:
Password Recovery
* By submitting the data, you agree ✓ to our privacy policy
Registration
* By submitting the data, you agree ✓ to our privacy policy